LIFT IN ACCORDANCE WITH THE MACHINE DIRECTIVE

Home Lift^®

- is a new product on the Polish market. It is produced in accordance with the Machinery Directive 2006/42/EU retains all features of the lifts. A 1:2 hydraulic drive is based on the Fluitronic^® technology with a proportional, electronic, digitally controlled valve block NGV. It is equipped with telescopic, automatic cabin and shaft doors. Call and run orders are executed fully automatically. The minimum shaft dimensions are the record ones: pit 15 cm, and 260 cm headroom. The Home Lift^® with maximum load of 400 kg is driven by a single phase motor of 2.2 kW power. In case of power failure the cabin goes to the lowest stop and opens the door. The high quality of the device confirms a long warranty: extended up to 10 years.

LIFT IN YOUR HOUSE

– it is an information campaign aimed at the future and current home owners. Following the other countries, we would like the lift to be a piece of equipment not only in the public buildings, but also in private houses as well. Guided by this idea, GMV has developed the Home Lift^® - a unique lift for each user and designed to work in every building. It’s worth to think about Home Lift^® the designing process, even if the decision to purchase it would be postponed for the next years. However, if the building already exists, it is possible to install it in the shaft tower: internal or external. The cost of equipment and the assembly is lower than the cost of buying a car and comparable - for example - with the fully equipped kitchen cost. Home Lift^® meets the strict European rules on that type of equipment in the following areas: functionality, performance and security.

For more information visit our website or contact us at the phone number and e-mail:

+48 22/858 91 30

Home Lift^® characteristics:

GMV producer
Compliance with the Machine Directive 2006/42/EU
Drive: hydraulic 1:2 Fluitronic^® with a NGV proportional valve
Load: 250 - 400 kg / 3 - 5 persons
Max. travel: 12 m
Max. number of stops / approaches: 5/6
Lift cabin dimensions: WxD 80-110 x 100-140 cm / door: 70-90 cm
Automatic, telescopic lift cabin and landing doors
Option: fire-prove door EI
Automatic travelling between stops
Power supply: 230V - single phase or 400V – three phase /power: 1,5 - 2,2 kW
Speed: 0,15 m/s

Use: in new and existing residential buildings, public buildings, private houses.

NOTE: The great majority of this type of lift-platforms available on the market has semi-automatic doors manually opened. It often happens that accidentally fail to close the door stops the entire device. Moreover, the travel to a requested stop is possible only if the passenger is holding the right push-button pressed. This is a big challenge for disabled persons moving in a wheelchair, because access to the cabin and travel is much more difficult.

Home Lift^® works totally differently. The doors open and close automatically, as well as the travel to a requested stop.

The animation below explains the innovative operating mode of Home Lift^® in comparison with other lift-platforms.

Voltage: 230 V – single phase

Exemplary lift cabins

Home Lift cabin

More about HOME LIFT^® cabins

The idea of arranging a HOME LIFT^® elevator .pdf

Operation cycle of GMV HOME LIFT^® .pdf

Wheelchairs .pdf

More about lifts

HOME LIFT^® meets the requirements of the machine directive and is not a lift in the meaning of the lift directive. Newertheless, in the newly designed buildings, GMV recommends use of the Home Lifts^® of the following car dimensions: width x depth = 110 x 140 cm and the 90 cm wide door (one and two-entrance cabins) that meet the requirements of the construction code on accessibility for disabled persons.